GM005 DIGITAL TACHOMETER
INTRODUCTION
The GM-005 DIGITAL TACHOMETER provides a highly accurate readout of rotational speed in revolutions per minute (rpm). It is suitable for use on diesal engines, propellor shafts or any other rotating machinery.
The tachometer is free from moving parts and fully sealed so that it may be used to advantage in adverse conditions.
Remote operation is possible and practical as the tachometer is connected to its pickup by wiring only.
The GM-005 is built into a black anodised 85mm diameter case and its front face is made from poly-carbonate which provides strength along with a clear view through to the display readout. The display comprises a 4 digit greed light emitting diode.
Datasheet GM005.pdf
SPECIFICATIONS
| Power required: | DC voltage 8 to 30 volts at approximately 100mA. |
| Supported Rotational Speeds: | 0 – 9999 rpm. |
| Digital accuracy: | +/- one digit (crystal controlled reference). |
|
Input Signal: |
Minimum – 1 volt RMS. Maximum – 50 volts RMS. |
Reviews
There are no reviews yet.