gm238

GM238 DIGITAL AUTO-START MODULE

The GM-238 Digital Auto Start Module is a small DIN Rail Mounted unit intended for standby alternators, generators, and Pumps. It is housed in DIN Rail Mount case with aluminium cover plate. Terminal connections are made via a pluggable 18-way terminal block. The GM-238 incorporates a repeat start timer and speed switch into the one unit. The GM-238 has an LCD Display for displaying the current state if the engine.

INTRODUCTION

The GM-238 Digital Auto Start Module is a small DIN Rail Mounted unit intended for standby alternators, generators, and Pumps. It is housed in DIN Rail Mount case with aluminium cover plate. Terminal connections are made via a pluggable 18-way terminal block. The GM-238 incorporates a repeat start timer and speed switch into the one unit. The GM-238 has an LCD Display for displaying the current state if the engine.

The following settings can be adjusted using the Keypad:

• Number Of Teeth on the Flywheel
• SCO Rpm
• OS Rpm
• Over Speed Latch (ON or OFF)
• Crank Cycle Time
• Fail To Start attempts
• Fail To Start – Stop Cranking
• Start Input NO/NC
• Stop Input NO/NC
GM238 Digital Auto-Start Module


NOTE: These settings will not be lost in the event of Power Loss.

Datasheet GM238.pdf

SPECIFICATIONS

Input Voltage: 12 / 24VDC (Specify when ordering)
Signal Source : Magnetic pickup sensing ring gear rotation. May be paralleled with governor.
Relay Contacts : One change over on ENGINE RUN
One change over on FAIL TO START
One change over on CRANK PILOT
One change over on OVERSPEED
Indicators : LEDs for each Relay (LED on when Relay is Energised)
Character LCD Display

Reviews

There are no reviews yet.

Be the first to review “GM238 DIGITAL AUTO-START MODULE”

X