INTRODUCTION
The GM152 DIN RAIL DUAL SPEED SWITCH is a low cost printed circuit board (PCB) assembly for use as a starter motor cutout sensor and over speed switch on diesel prime movers. The engine speed is determined by measuring the output frequency from a magnetic pickup mounted adjacent to the engine ring gear. With rising motor speed the starter cutout relay will operate at a set point. Should the engine go into over speed an internal self-locking relay can only be released by interrupting the supply to the PCB.
NOTE: The GM152 is one of a range of low cost PCB assemblies designed for OEMs to assemble their own control cubicles for use with automatic standby diesel generator sets and fire pumps etc.
OPTION : The over speed switch can be non latching (specify when ordering).
SPECIFICATION
Supply voltage: | 12 or 24V DC (specify when ordering). |
Signal source: | Magnetic pickup sensing ring gear rotation. May be paralleled with governor. |
Speed settings: | Screwdriver adjusted potentiometers – factory preset if number of ring gear teeth and speed settings are defined (factory presets — 1000Hz, 3000Hz). |
Repeatability: | 2% |
Relay contacts: | Two functions – starter cut out and over speed, each has a single C/O contact 8A resistance loading, 4A inductive. |
Ambient temp: | 0-60C |
Weight: | |
Dimensions: | |
Material/finish: | Fibre glass PCB, clear varnish protection in DIN rail mounting braket. |
Reviews
There are no reviews yet.