GM151 SINGLE SPEED SWITCH

(0 st)

The GM-151 SINGLE SPEED SWITCH is a printed circuit board assembly intended to function primarily as an overspeed detector on Diesel prime movers. The engine speed is determined by measuring the output frequency from a magnetic pickup mouted adjacent to the engine ring gear. Should the engine go into overspeed, an internal self-locking relay is immediately energised. De-energisation can not take place until the supply voltage to the switch is interupted. Alteration of the operating set point is accomplished through a screw driver adjusted potentiometer. Designed for panel mounting.

Qty:
Categories: ,

INTRODUCTION

The GM-151 SINGLE SPEED SWITCH is a printed circuit board assembly intended to function primarily as an overspeed detector on Diesel prime movers. The engine speed is determined by measuring the output frequency from a magnetic pickup mouted adjacent to the engine ring gear. Should the engine go into overspeed, an internal self-locking relay is immediately energised. De-energisation can not take place until the supply voltage to the switch is interupted. Alteration of the operating set point is accomplished through a screw driver adjusted potentiometer. Designed for panel mounting.

GM151 Single Speed Switch

Datasheet GM151.pdf

SPECIFICATIONS

Supply voltage source: 12 or 24 volts DC (specify when ordering).
Required signal: Magnetic pickup, sensing ring-gear rotation. May be parralleled with govenor or other Gammatron modules.
Speed setting: Screw driver adjusted potentiometer. Factory preset if ring-gear and required setting provided.

Repeatability:

+/- 2%
Relay contacts: Single changeover, 8A resistive loading. 4A inductive. Relay locks on in the event of an overspeed condition.

 

Reviews

There are no reviews yet.

Be the first to review “GM151 SINGLE SPEED SWITCH”
X