Battery Chargers » Industrial
The following products fall under the Industrial category.
For more details on products to support your application contact us.
GM013 - Battery Charger image GM013 - Battery Charger (Linear 4A)
by Gammatron

The GM013 AUTOMATIC BATTERY CHARGER is a compact unit designed for internal switchboard mounting. A separate transformer for 12 or 24 Volt use is required. The charging characteristic is initially a constant current which automatically tapers off to a very low level of trickle current as the battery voltage rises towards the charger float voltage output.

GM014 - Battery Charger image GM014 - Battery Charger (Auto Linear 10A)
by Gammatron

The GM014 AUTOMATIC BATTERY CHARGER is a compact unit designed for internal switchboard mounting. The charging characteristic is initially a constant current which automatically tapers off to a very low level of trickle current as the battery voltage rises towards the charger float voltage output.

GM022 - Battery Charger image GM022 - Battery Charger (Auto Linear 30A)
by Gammatron

The GM022 AUTOMATIC BATTERY CHARGER is a compact unit designed for internal switchboard mounting. The charging characteristic is initially a constant current which automatically tapers off to a very low level of trickle current as the battery voltage rises towards the charger float voltage output.

GM023 - Battery Charger image GM023 - Battery Charger (Auto Linear 20A)
by Gammatron

The GM023 AUTOMATIC BATTERY CHARGER is a compact unit designed for internal switchboard mounting. The charging characteristic is initially a constant current which automatically tapers off to a very low level of trickle current as the battery voltage rises towards the charger float voltage output.


It's 5:04 PM in South Australia.
Please contact us via email.
The GM-010 S.C.O. SPEED SWITCH is a panel mounted printed circuit board (PCB) assembly intended primarily for .....
The Delta reverse power relay is used in conjunction with load sensing circuits, e.g. Woodward 2301 load .....
The GM016 REPEAT START TIMER is a low cost printed circuit board (PCB) assembly designed for panel .....
The GM013 AUTOMATIC BATTERY CHARGER is a compact unit designed for internal switchboard mounting. A separate transformer .....